View ICPLM601_8786635.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 absolute maximum ratings (t a = 25c) input diode forward current 50ma reverse voltage 5v power dissipation 100mw output output current 50ma output voltage 7v supply voltage 7v power dissipation 85mw total package isolation voltage 3750v rms total power dissipation 85mw operating temperature -40 to 85 c storage temperature -55 to 125 c lead soldering temperature (10s) 260c description the icplm600, ICPLM601 and icplm611 devices each consists of an infrared emitting diode optically coupled to a high speed integrated photo detector logic gate with a strobable output. these devices belong to isocom compact range of optocouplers. features ? high speed 10mbit/s ? half pitch 1.27mm ? common mode transient immunity 20kv/ s min. (icplm611) ? high ac isolation voltage 3750v rms ? guaranteed performance from -40c to 85c ? pb free and rohs compliant ? safety approvals pending applications ? line receivers, data communication ? lsttl to ttl, lsttl or 5v cmos ? data multiplexing ? pulse transformer replacement ? switch mode power supplies ? ground loop elimination ? computer peripheral interface order information ? available in tape and reel with 3000pcs per reel. isocom components 2004 ltd unit 25b, park view road west, park view industrial estate hartlepool, cleveland, ts25 1ud, united kingdom tel: +44 (0)1429 863 609 fax : +44 (0)1429 863 581 e-mail: sales@isocom.co.uk http://www.isocom.com isocom components asia ltd hong kong office, block a, 8/f, wah hing industrial mansion, 36 tai yau street, san po kong, kowloon, hong kong. tel: +852 2995 9217 fax : +852 8161 6292 e-mail sales@isocom.com.hk 1. anode 3. cathode 4. gnd 5. vout 6. vcc vcc must be bypassed by a a 0.1 f capacitor.
2 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 truth table (positive logic) electrical characteristics (t a = -40c to 85c unless otherwise specified) input output coupled * typical values at t a = 25c parameter symbol test condition min typ.* max unit forward voltage v f i f = 10ma 1.45 1.8 v reverse voltage v r i r = 10a, t a = 25c 5.0 v temperature coefficient of v f v f / t a i f = 10ma -1.9 mv/c input capacitance c in v f = 0v, f = 1mhz 70 pf parameter symbol test condition min typ.* max unit high level supply current i cch i f = 0ma, v cc = 5.5v 6.0 9 ma low level supply current i ccl i f = 10ma, v cc = 5.5v 7.5 10 ma input output h l l h parameter symbol test condition min typ.* max unit high level output current i oh v cc = 5.5v, v o = 5.5v i f = 250 a 2.1 30 a low level output voltage v ol v cc = 5.5v, i f = 5ma, i ol = 13ma 0.4 0.6 v input threshold current i ft v cc = 5.5v, v o = 0.6v, i ol = 13ma 2.4 5 ma
3 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 electrical characteristics (t a = -40c to 85c unless otherwise specified) switching characteristics (t a = -40c to 85c, i f = 7.5ma, v cc = 5v unless otherwise specified) * typical values at t a = 25c parameter symbol test condition min typ.* max unit propagation delay time to logic low t phl r l = 350 ? , c l = 15pf, t a = 25c 41 100 ns propagation delay time to logic high t plh r l = 350 ? , c l = 15pf, t a = 25c 50 100 ns pulse width distortion | t phl -t plh | r l = 350 ? , c l = 15pf 9 35 ns output rise time t r r l = 350 ? , c l = 15pf 40 ns output fall time t f r l = 350 ? , c l = 15pf 10 ns common mode transient immunity at logic high cm h ICPLM601 i f = 0ma, v oh = 2.0v, r l = 350 ? , v cm = 50vp-p, t a = 25c 5000 v/ s icplm611 i f = 0ma, v oh = 2.0v, r l = 350 ? , v cm = 1kvp-p, t a = 25c 20000 common mode transient immunity at logic low cm l v/ s ICPLM601 i f = 7.5ma, v ol = 0.8v, r l = 350 ? , v cm = 50vp-p, t a = 25c 5000 icplm611 i f = 7.5ma, v ol = 0.8v, r l = 350 ? , v cm = 1kvp-p, t a = 25c 20000 icplm600 i f = 0ma, v oh = 2.0v, r l = 350 ? , v cm = 10vp-p, t a = 25c 1000 icplm600 i f = 7.5ma, v ol = 0.8v, r l = 350 ? , v cm = 10vp-p, t a = 25c 1000 propagation delay skew t psk r l = 350 ? , c l = 15pf 40 ns
4 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 electrical characteristics notes : 1. the v cc supply must be bypassed by a 0.1 f capacitor or larger with good high frequency characteristic and should be connected as close as possible to the package v cc and gnd pins. 2. t plh ? propagation delay is measured from the 3.75ma level on the high to low transition of the input current pulse to the 1.5 v level on the low to high transition of the output voltage pulse. 3. t phl ? propagation delay is measured from the 3.75ma level on the low to high transition of the input current pulse to the 1.5 v level on the high to low transition of the output voltage pulse. 4. t psk ? the magnitude of the worst case difference in t phl and/or t plh that will be seen between devices at any given temperature within the wors t case operating condition range. 4 t r ? rise time is measured from the 10% to the 90% leve ls on the low to high transition of the output pulse. 5. t f ? fall time is measured from the 90% to the 10% leve ls on the high to low transition of the output pulse. 6. cm h ? the maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state (i.e., v out > 2.0v). 7. cm l ? the maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the low output state (i.e., v out < 0.8v).
5 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 fig 1 forward current vs forward voltage fig 2 output voltage vs forward current fig 3 input threshold current vs t a fig 4 low level output voltage vs t a fig 5 low level output current vs t a fig 6 high level output current vs t a
6 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 fig 7 propagation delay vs forward current fig 8 pulse width distortion vs t a fig 9 rise and fall time vs t a
7 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 common mode transient immunity in logic high level is the maximum tolerable (positive) dv cm /dt on the leading edge of the common mode pulse signal v cm , to assure that the output will remain in a logic high state (i.e., v o > 2.0v). common mode transient immunity in logic low level is the maximum tolerable (negative) dv cm /dt on the trailing edge of the common mode pulse signal, v cm , to assure that the output will remain in a logic low state (i.e., v o < 0.8v). fig 10 switching time test circuit fig 11 common mode transient immunity test circuit i f =7.5ma, position b i f =0ma, position a cm l cm h v o (min) v o (max) peak v cm 0v 5v v o v o 0.5v 10% 90% output (v o ) output (v o ) input (i f ) i f =7.5ma i f =3.75ma 1.5v t r t f t plh t phl
8 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 order information device marking icplm600 denotes device part nu mber (icplm600 is used as example) y denotes 1 digit year code ww den otes 2 digit week code i denotes isocom icplm600, ICPLM601, icplm611 after pn pn description packing quantity none icplm600, ICPLM601, icplm611 surface mount tape & reel 3000 pcs per reel icplm600 i yww
9 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 package dimensions (mm) recommended pad layout (mm)
10 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 ir reflow soldering temperature profile (one time reflow sold ering is recommended) time (s) temp (c) ! 25c t s preheat 60s ? 120s t smin t smax 260c t l 217c time 25c to peak temperature t p t p - 5c t p max ramp up rate 3c/s max ramp down rate 6c/s t l 200c 150c profile details conditions preheat - min temperature (t smin ) - max temperature (t smax ) - time t smin to t smax (t s ) 150c 200c 60s - 120s soldering zone - peak temperature (t p ) - liquidous temperature (t l ) - time within 5c of actual peak temperature (t p ? 5c) - time maintained above t l (t l ) - ramp up rate (t l to t p ) - ramp down rate (t p to t l ) 260c 217c 30s 60s - 100s 3c/s max 6c/s max average ramp up rate (t smax to t p ) 3c/s max time 25c to peak temperature 8 minutes max
11 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 tape and reel packaging direction of feed from reel dimension no. a0 b0 d0 d1 e f dimension (mm) 4.40.1 7.40.1 1.50.1 1.50.3 1.750.1 7.50.1 dimension no. po p1 p2 t w k0 dimension (mm) 4.00.1 12.00.1 2.00.1 0.40.1 16.0 +0.3/-0.1 2.40.1
12 24/02/2016 icplm600, ICPLM601, icplm611 isocom components dc93193 notes : - isocom is continually improving the qu ality, reliability, function or design an d isocom reserves the right to make changes without further notices. - the products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - for equipment/application where high reliability or safety is required, such as spac e applications, nuclear power control equipment, medical equipment, etc., pl ease contact our sale s representatives. - when requiring a device for any ?specific? app lication, please contact our sales for advice. - the contents described herein are subj ect to change without prior notice. - do not immerse device body in solder paste.
13 07/08/2014 disclaimer isocom components dxxxxxx isocom is continually working to improve the qualit y and reliability of its prod ucts. nevertheless, semiconductor devices in general c an malfunction or fail due to their inherent electrical sensitivity and vulner ability to physical stress. it is the responsibilit y of the buyer, when utilizing isocom products, to comply with t he standards of safety in making a safe design for the entire system, and to avoid situati ons in which a malfunction or failure of such isocom products could cause loss of human lif e, bodily injury or damage to property. in developing your designs, please ensure that isocom products are used within specified operating ranges as set forth in the most recent isocom products specifications. __ the isocom products listed in this document ar e intended for usage in general electronics applications (computer , personal equipment, office equi pment, measuring equipment, industrial robotics, domestic appliances, etc.). these isocom products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage incl ude atomic energy c ontrol instruments, airplane or spaceship instruments, transportation instruments, traffic si gnal instruments, combustion control instrum ents, medical instruments, all types of safety devices, etc.. unintended usage of isocom products listed in this document shall be made at the customer?s own risk. __ gallium arsenide (gaas) is a substance used in the products described in this document. gaas dust and fumes are toxic. do not break, cut or pulverize the product, or use chemicals to dissolve them. when disposing of the products, follo w the appropriate regulations. do not dispose of the products with other i ndustrial waste or with domestic garbage. __ the products described in this document are subject to the foreign exchange and foreign trade laws. __ the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by isoc om components for any in fringements of intellectual property or ot her rights of the third par ties which may result from its use. no license is granted by implication or otherwis e under any intellectual property or other rights of isocom components or others. __ the information contained herein is subject to change without notice.

▲Up To Search▲

Price & Availability of ICPLM601

	To Download ICPLM601 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .